Anti-Iron Fallout Remover – 750ml
Ferrous contaminants which bond to your paintwork can ruin the bodywork of your vehicle if left untreated, they become embedded in the paintwork causing the onset of rust. Pure Definition’s innovative Anti-Iron Fallout Remover is developed to neutralise the contaminants before they have chance to attack the paintwork.
☑️ Safely Deep Cleans Paintwork
☑️ PH Neutral Formulation
☑️ Removes Stubborn Brake Dust
☑️ Bleeds Red When Decontaminating
1 x Anti-Iron Fallout Remover (750ml)
PAINTWORK CLEANER, WHEEL CLEANER
Anti-Iron Fallout Remover
1. Wash your vehicle or wheels ensuring that all loose dirt is removed from the paintwork before applying Anti-Iron Fallout Remover. Do not use in hot direct sunlight.
2. Once the surface is ready, shake the bottle well and spray onto the surface. Allow the formulation to penetrate the contaminants, cleaning deep into the paintwork. You can visually see the fluid working its magic as the elimination and release of the ferrous particles from the paintwork causes the fluid to bleed red/purple.
3. Finally, rinse or jet wash the surface with plenty of water then move onto the next detailing procedure such as claying, or polishing the fresh paintwork surface
UNIQUE COLOUR-CHANGING CLEANER
Anti-Iron Fallout Remover is a speciality cleaner and decontaminator which removes stubborn brake dust, iron and other embedded contamination from wheels and paintwork – before any long-term damage can be caused!
REMOVES DAMAGING CONTAMINATION
Over time your bodywork can become coated in thousands of fine iron deposits which are not always visible to the eye and can’t be removed through regular washing techniques. Leaving these deposits will most certainly lead to rust and paint failure in the future.
DEEP CLEANS PAINTWORK PORES
Simply spray the advanced formula onto the surface and watch the colour turn purple/red as the ferrous metals react with the catalysts within the formula – neutralising, breaking down and releasing the embedded contamination.
DECONTAMINATE BRAKE DUST
Don’t forget to treat you wheels! Wheels are often caked in damaging break dust, camouflaging the clarity of the wheels finish. Anti-Iron Fall Remover can be used to safely decontaminate this area – restoring the original finish.
RINSE AWAY CONTAMINATION
After leaving the formulation on the surface for approximately 5 minutes, rinse the car paint and wheels thoroughly with a power washer, washing away the embedded contamination – wipe the surface dry to reveal the clean surface!